Carousel memory
In this article we will analyze the impact of Carousel memory on modern society. Carousel memory is a topic that has gained relevance in recent years, generating debates and controversies in different areas. Throughout history, Carousel memory has played a crucial role in the evolution of humanity, influencing political, social, economic and cultural aspects. During this article we will explore different perspectives on Carousel memory, addressing its importance in the current context and its potential to shape the future. Additionally, we will examine the ethical and moral implications that Carousel memory presents, as well as its possible long-term consequences.
Carousel memory is a type of secondary storage for computers, which was created by Swedish computer engineers Erik Stemme and Gunnar Stenudd.[1] It was first shown at an exhibition in Paris in 1958.[2]
Description
The FACIT ECM 64, manufactured by Swedish company Facit AB, is a prototype of carousel memory. To avoid having a single, long magnetic tape, it instead has 64 small rolls of 9 meters each, with 1.6-cm wide tape on each roll, divided into eight channels per roll.[3]: 3 The tape speed is 5 m/s.[3]: 6 To read a particular roll, the carousel rotates so the desired roll ends up at the bottom. A counterweight sits at the free end of the tape, and facilitates the roll in moving out and down into a mechanism with a read-and-write head. The tape is then rewound. The average seek time is 2 seconds[3]: 11 and the storage space is 2560 kilobytes.[4] The control system is operated by transistors. Both the carousel and individual spools are replaceable.[1]
The magnetic tape is a 5/8-inch (1.6 cm) wide and 0.05 mm thick Mylar 3M Co type 188.[3]: 11 The storage density is specified to 8 bits/mm,[3]: 4 and the access head is capable of simultaneous read/write operations.[3]: 3 The power requirement is three-phase 380 volts 50 Hz with 300 W when in standby and 750 W when active. Signaling for data uses eight parallel -20 V to 0 V 5 μs pulses.[3]: 13
Peak transfer speed is 182,044 bits/s,[3][4] using eight parallel lines[3]: 13 and thus 22,756 bits/s per line.
The first delivery of the Facit EDB 3 computer was in 1958 (to ASEA in Västerås) used the carousel memory Facit ECM 64.[5]
See also
- BESK, Sweden's first electronic computer, also developed by Erik Stemme
- Exatron Stringy Floppy, 1978 endless tape drive
- IBM 2321 Data Cell
- Karlqvist gap, calculation of magnetic field in ferromagnetic layer
- Rotronics Wafadrive, 1984 endless tape drive
- ZX Microdrive, 1983 endless tape drive
References
- ^ a b Pär Rittsel (2002), Valsen inledde skivans historia [The roll initiated the disc history] (in Swedish), International Data Group (published 2010-09-11), retrieved 2016-03-22
- ^ Magnetband till karusellminne, Föremål [Magnetic tape for carousel memory, Object] (in Swedish), Kringla, Riksantikvarieämbetet, retrieved 2016-03-22
- ^ a b c d e f g h i FACIT electronics AB (1961), TPU 610301 FACIT ECM 64 Karusellminne, Preliminär teknisk beskrivning [TPU 610301 FACIT ECM 64 Carousel memory, preliminary technical description] (PDF) (in Swedish), Swedish National Museum of Science and Technology (published 2012-06-15), p. 3, archived from the original (PDF) on 2016-10-13
- ^ a b FACIT electronics AB (1963), Facit Electronic presenterar FACIT ECM 64 Magnetbandsminne av karuselltyp med direkt access [Facit Electronics presents FACIT ECM 64 Magnetic tape memory of carousel type with direct access] (PDF) (in Swedish), Swedish National Museum of Science and Technology (published 2012-06-15), archived from the original (PDF) on 2016-10-13
- ^ Arvidsson, Göran (2002), FACIT i den tidiga dataåldern [FACIT in the early computer age] (PDF) (in Swedish) (published 2015-08-23), p. 3
Further reading
- Karlqvist, Olle (March 1962), "Applications to the magnetic tape storage unit, facit ECM64 (the Carousel Memory)", BIT Numerical Mathematics, 2 (1): 16–20, doi:10.1007/BF02024778