In today's world, EMD F7 has become increasingly important in different aspects of daily life. Whether in the personal, professional or social sphere, EMD F7 has become a fundamental element that influences our decisions, opinions and actions. Over time, EMD F7 has evolved and acquired new dimensions, leading us to reflect on its impact on society and the development of humanity. In this article, we will explore the different facets of EMD F7 and analyze its relevance in various contexts, as well as its role in shaping our world today.
Model of 1500 hp North American cab diesel locomotive
"F7B" redirects here. For the XF7B fighter, see Boeing P-29.
The F7 was the fourth model in GM-EMD's successful line of F-unit locomotives, and by far the best-selling cab unit of all time. In fact, more F7s were built than all other F-units combined. The F7 succeeded the F3 model in GM-EMD's F-unit series, and was replaced in turn by the F9. Final assembly was at GM-EMD's La Grange, Illinois, plant or GMD's London, Ontario, facility. There was no F4, -5 or -6 model; "7" was chosen to match the contemporary twin-engine E7, and was also applied to the new GP7 road-switcher.
The F7 differed from the F3 primarily in internal equipment—mostly electrical—and some external features. Its continuous tractive effort rating was 20 percent higher, e.g. 40,000 lbf (180 kN) for an F7 with 65 mph (105 km/h) gearing, compared to 32,500 lbf (145 kN) for an F3 with the same gearing.
Many F7s remained in service for decades, as railroads found them economical to operate and maintain. However, the locomotive was not very popular with yard crews who operated them in switching service because they were difficult to mount and dismount, and it was also nearly impossible for the engineer to see hand signals from a ground crew without leaning way outside the window. As most of these engines were bought and operated before two-way radio became standard on most American railroads, this was a major point of contention. In later years, with the advent of the "road switchers" such as the EMD GP7, F-units were primarily used in "through freight" and "unit train" service where there was little or no switching to be done.
Engine and powertrain
The F7's prime mover is a 16-cylinder 567B series diesel engine developing 1,500 hp (1.1 MW) at 800 rpm. The 567B is a mechanically aspiratedtwo-stroke design in a 45-degree V engine configuration, with 567 cu in (9.29 L) displacement per cylinder, for a total of 9,072 cu in (148.66 L). A direct current generator that is mechanically coupled to the flywheel end of the engine powers four traction motors, with two motors mounted on each Blomberg B truck. EMD has built all of its major components since 1939.
Identification
There are no easily identifiable differences between late F3 production and early F7 production; the major differences were all internal electrical system changes. However, no F7 had the "chicken wire" grilles seen on most F3s, and no F3s had later F7 changes described below under Phases.
The F9 is distinguishable from the late F7 by having five, rather than four, carbody center louver groups covering the carbody filters. The additional one is placed ahead of the first porthole, where F7s have no openings. The F9's greater power output, of course, cannot be seen from the outside.
There were also two main classes of F7s: passenger and freight. Most passenger units had upper and lower headlights, but there were exceptions. Many freight units had the upper Mars or Pyle brand warning light as well. And some passenger units only had a single upper headlight, i.e. the Pennsylvania. Many units eventually had the upper lights or the door light removed/plated over and the Mars/Pyle light removed. These early warning lights had a motor and linkages that often required maintenance in the shops.
Rebuilds
Several F7s were rebuilt by Morrison–Knudsen as F9PHs and used in passenger operations. Others were rebuilt as the "FP10" and used by the Massachusetts Bay Transportation Authority for their commuter rail service. In addition, the Santa Fe had 190 of their F7As rebuilt into CF7 hood units in the 1970s. Only one original F7 unit from the railway exists to this day.
In the early 2000s, a single unpowered EMD F cab unit #7100 (ex-Baltimore & Ohio Railroad F7 #4553) operated on MARC, occasionally substituting for a cab car. In addition to serving as an all-purpose control unit, it also had a head-end power generator that supplied electricity to the train.
Several F7s survive today, mostly in museums and tourist railroads.
The Norfolk Southern Railway previously rostered four F7 units (two A units and two B units), all which were rebuilt in 2007. The two A units were rebuilt into F9PH units, and rebuilt again into F9A units. They were used on inspection trains and Office Car Specials until 2019, when NS sold the four units. Two of them were sent to the Aberdeen, Carolina and Western Railway, while the other two were sent to the Reading Blue Mountain and Northern Railroad.
Western Pacific F7A 913: This engine is currently listed as serviceable.
Atchison, Topeka & Santa Fe No. 347C GM-EMD 1949 F7A was given as a gift to the museum by Santa Fe in March 1986 and is repainted to original warbonnet colors. Currently inoperable.
Southern Pacific No. 6402 GM-EMD 1952 F7A was also given as a gift by the Pacific Coast Chapter of the Railroad and Historical Society in June 1978. Part of the locomotive has since been cutaway to display the inner workings of a diesel locomotive.
The Galveston Railroad Museum owned F7As Texas Limited #100 (ex-Southern Pacific #6379) and #200 (ex-Southern Pacific #6309). This duo headed the "Texas Limited" passenger train which made runs to and from Houston until track speed restrictions and liability insurance costs ended operations. [when?] Both units were scrapped in 2011 after extensive damage resulting from being submerged in saltwater after Hurricane Ike. The museum now owns 2 more F7's, #315 and #316, which are both painted in ATSF warbonnet colors. Both units are ex-Southern Pacific, #'s 6443 (315) and 365 (316); they have parts salvaged from the Texas Limited units.
Marre, Louis A. (1995). Diesel Locomotives: The First 50 Years: A Guide to Diesels Built Before 1972. Railroad Reference Series. Waukesha, Wisconsin: Kalmbach Publishing. ISBN978-0-89024-258-2.
Solomon, Brian (2010). Vintage Diesel Power. Minneapolis, Minnesota: MBI Publishing. ISBN978-0-7603-3795-0.
Solomon, Brian (2011). Electro-Motive E-Units and F-Units: The Illustrated History of North America's Favorite Locomotives. Minneapolis, Minnesota: Voyageur Press. ISBN978-0-7603-4007-3.
Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. Minneapolis, Minnesota: Voyageur Press. ISBN978-0-7603-4370-8.