Tu banner alternativo

TAE buffer

In this article, we will explore the impact of TAE buffer on modern society. TAE buffer has been the subject of interest and debate for a long time, and its influence spans a wide range of contexts. From the cultural to the political sphere, TAE buffer has left a mark on all aspects of contemporary life. Over the next few pages, we will examine how TAE buffer has shaped our perceptions, behaviors, and relationships, and consider its role in shaping the world we inhabit today.

Tu banner alternativo

TAE buffer is a buffer solution containing a mixture of Tris base, acetic acid and EDTA.

In molecular biology, it is used in agarose electrophoresis typically for the separation of nucleic acids such as DNA and RNA.[1] It is made up of Tris-acetate buffer, usually at pH 8.3, and EDTA, which sequesters divalent cations. TAE has a lower buffer capacity than TBE and can easily become exhausted, but linear, double stranded DNA runs faster in TAE.

According to studies by Brody and Kern, sodium boric acid[a] is a superior and cheaper conductive media for most DNA gel electrophoresis applications.[2][3]

Uses

TAE (Tris-acetate-EDTA) buffer is used as both a running buffer and in agarose gels.[4] Its use in denaturing gradient gel electrophoresis methods for broad-range mutation analysis has also been described.[5] TAE has been used at various concentrations to study the mobility of DNA in solution with and without sodium chloride.[6] However, high concentrations of sodium chloride (and many other salts) in a DNA sample retard its mobility. This may lead to incorrect interpretations of the resulting DNA banding pattern.

Preparation

TAE buffer is commonly prepared as a 50× stock solution for laboratory use. A 50× stock solution can be prepared by dissolving 242 g Tris base in water, adding 57.1 ml glacial acetic acid, and 100 ml of 500 mM EDTA (pH 8.0) solution, and bringing the final volume up to 1 litre. This stock solution can be diluted 49:1 with water to make a 1× working solution. This 1× solution will contain 40 mM Tris, 20 mM acetic acid, and 1 mM EDTA.

No. Name Per 1 mole 50x solution 50× 1× solution 1X
1 Tris base 121.1 g/L 2 M 242.2 g/L 40 mM 4.844 g/L
2 acetic acid 57.1 ml/L 1 M 57.1 ml/L 20 mM 1.21 ml/L
3 EDTA disodium salt dihydrate 372.24 g/L 50 mM 18.612 g/L 1 mM 0.372 g/L

2 M = 2000 mM so 2000 mM /50 = 40 mM for 1×.
1M = 1000 mM so 1000 mM /50 = 20 mM for 1×.
50 mM /50 = 1 mM for 1×.

First of all, these ingredients should be dissolved in 500 ml, then made up to 1000 ml.
Note: EDTA will take more time to dissolve, so while dissolving EDTA use magnetic stirrer (few amounts of EDTA in 3 or 4 times).

A step-by-step recipe of the preparation method for 50× TAE buffer is available on protocols.io.[7]

See also

Notes

  1. ^ 5 mM disodium borate decahydrate or 10 mM sodium hydroxide, pH adjusted to 8.5 with boric acid.

References

  1. ^ Ogden, R.C., and Adams, D.A., (1987) Electrophoresis in agarose and acrylamide gels. Methods Enzymol., 152:, 61-87.
  2. ^ Brody, J.R.; Kern, S.E. (2004). "History and principles of conductive media for standard DNA electrophoresis" (PDF). Anal Biochem. 333 (1): 1–13. doi:10.1016/j.ab.2004.05.054. PMID 15351274.
  3. ^ Brody, Jonathan R.; Kern, Scott E. (February 2004). "Sodium boric acid: a Tris-free, cooler conductive medium for DNA electrophoresis". BioTechniques. 36 (2): 214–216. doi:10.2144/04362BM02.
  4. ^ Sambrook, Fritsch, and Maniatis (1989) Molecular Cloning: A Laboratory Manual, 2nd ed., Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York, volume 3, apendices B.11 and B.23 ISBN 0-87969-309-6
  5. ^ Hayes, V.M.; et al. (1999). "Improvements in gel composition and electrophoretic conditions for broad-range mutation analysis by denaturing gradient gel electrophoresis". Nucleic Acids Res. 27 (20): e29. PMC 148660. PMID 10497279.
  6. ^ Stellwagen, E.; Stellwagen, N.C. (2002). "The free solution mobility of DNA in Tris-acetate-EDTA buffers of different concentrations, with and without added NaCl". Electrophoresis. 23 (12): 1935–1941. doi:10.1002/1522-2683(200206)23:12<1935::AID-ELPS1935>3.0.CO;2-#. PMID 12116139.
  7. ^ Behle, Anna; Pawlowski, Alice (6 April 2018). "Recipe for 50x TAE buffer". doi:10.17504/protocols.io.gtvbwn6. {{cite journal}}: Cite journal requires |journal= (help)
Wikious
Boobota
Sagapedia